Pneumatic Reinforcing Wire Mesh Making Machine Width 2500mm
The working process
1. Feeding: Cross wire & Line wire are both pre-cut wires.
Cross wires are feeded to the mould manually then the wire falling
autoamticlly, while line wires are automatically feeded by the
2.Welding: The main machine starts welding and adopts a synchronous
control technology, both branch control welding time and welding
time are controlled by a PLC digital programming system, and the
pore size can be adjusted only by direct input on a touch screen
control panel; welding power is pneumatic, and welding pressure can
be easily and intuitively adjusted.
3.Welding finish: The servo motor controls an automatic mesh
drawing process until the whole mesh is welded, and the automatic
mesh connecting and discharging system is started; the welding of
the next mesh is started.
The machine is introduced
Pneumatic steel mesh welding machine type used in the manufacture
of pre-straightened and cut,simple and compact welding production
line for a mass production of small and medium-sized steel mesh,can
be welded ,and other welded mesh fence. Native multi-stage electric
resistance welding principle,the vertical bars,horizontal bars
according to the set requirements,welded into a solid mesh.Suitable
can be cold -rolled steel ribbed steel,hot -rolled or cold -rolled
smooth steel bars.
|Wire diameter||5mm-12mm||Warp feeding||Pre-cut|
|Weft distance||Min. 50mm||Weft feeding||Pre-cut|
|Warp distance||100mm-300mm||Power supply||AC380V-440V|
|Warp quantity||26||Welding width||2500mm|
|Mesh length||12m||Welding speed||45 times/min|
1. air tank
2. air compressor
3. wire straighting and cutting machine